Features:
1. Designed for laser cutting: Atomstack Maker D2 air purifier, a 8-layer filter element specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.97% (atomstack laboratory test data).
2. Contribute to environmental protection: Discharging the cutting waste gas directly into the atmosphere will cause more pollution, so use an air purifier to make the air fresh.
3. Healthy creation: use the atomstack maker air purifier, and say goodbye to all polluting gases: PM2.5/PM10/formaldehyde/TVOC, etc. Health is priceless, for the health of you and your family, please do a good job of safety protection.
4. Break through the limitations of the working environment: no longer need to worry about the laser cutting workplace, use the protective cover and air purifier of atomstack maker, no need to worry about smoke exhaust and air pollution, you can work safely in your garage, basement, or workshop.
5. Long life: a single filter element can be used for about 3 hours a day in normal laser cutting wood board, and can work continuously for 3 months, and the single continuous working time can reach 200H, giving you long-term efficient protection.
6. Easy to replace: just 3 steps, no need to disassemble the circuit, and quickly replace the filter element in five minutes;
7. High adaptability: the atomstack maker purifier can be adapted to all protective box products of Atomstack, Ortur, NEJE, xtool and other brands.
🔝 High-grade safety protection:Atomstack Maker FB2 Plus rigid protective case, the whole use of three layers of protective materials: 900D high-density flame retardant Oxford cloth + honeycomb board + professional fireproof cloth, can be flame retardant under open fire in wood for more than 3 minutes. Rigid case for long-term use without collapse.
🔝 Large capacity:1170*730*310mm large capacity, perfectly compatible with 99% of semiconductor laser engraving machines on the market that use extension bars.
🔝 Lightweight and easy to store: Adopts a no-assembly box design, which can be assembled in 3 minutes and can be quickly disassembled for storage.
🔝 No smelly & Protect Your Health: With the Atomstack Maker FB2 Plus case, you can isolate the pollutants produced during the laser cutting: PM2.5/PM10/formaldehyde/TVOC, etc., and exhaust the harmful gases outside through the extension rod. Health is priceless. For the health of you and your family, please do your best to protect yourself.
🔝 New Air Outlet Design: Atomstack Maker FB2 Plus is of unique double side fan hole design, no more worry about the laser cutting workplace. Using atomstack maker hood and air purifier, you no longer need to worry about fume exhaust problems and air pollution. You can work safely in your garage, basement, workshop.
🔝 Highly Adaptable: FB2 Plus box can be compatible with all Atomstack and Ortur, NEJE, Xtool and products of other brands, with the corresponding wiring slots reserved.
Specification:
Model: D2
Brand: Atomstack Maker
Size: 9.5x10.6x15.9"/240x269x404mm
Power supply: 5V 1A
Noise Level: 450≤dB
Air Flow: 255m³/h
Voltage: 100-240V
Model: FB2 Plus
Power supply: 12V 3A
Volume: 1170730310mm
Extension tube length: 2M
Exhaust fan speed: 7500 RPM
Note: Must be used together with a protective cover, compatible with all protective covers on the market,
Packing List:
1 x Air Purifier
1 x FB2 protective box set
1 x Exhaust pipe
1 x Metal mesh cover
1 x Exhaust fan
1 x DC12V power supply
4 x M4*50 screws Nut combination
1 x Throat hoop
1 x Flange fan
1 x H3 Allen key
1 x Flat-blade screwdriver
